Assembly Instructions:Place the base of the litter box in front of you with the opening lip facing towards you.Place the bottom of the grate between the two plastic holders in the base of the box. (Note: The side that states "Bend Here - This Side Up" is facing your left side)Bend the grate towards the right side of the box.Starting at the back of the litter box, press the grate into the groove located on the top of the base.In one continuous motion, press the grate into the groove from back to front. Do not press from the middle out, as this will not lock the top of the grate into the top of the base.Place the top of the litter box onto the base. Make sure the latches are pulled back to ensure they slide into the slots in the top of the base.Slide all of the latches across to lock the top onto the base.Place the Scoop into the open slot located on the right side of the box.Operating Instructions:Face the front of the box with the cat opening facing towards you.Roll the box halfway to the right (180 degrees). Note: Do not roll the box too quickly as it will not have enough time to separate the clumped litter from the good litter.Roll the box back to your left to its starting position.Remove the Scoop with the clumped litter and dispose of its contents accordingly.Place the Scoop back into the slot in the litter box.Roll the box a quarter of the way to your left. This will cause the kitty litter to come back out into the box.Please Note: A clumping litter is needed in order for this product to work effectively
Omega Paw Large Roll 'n Clean Litter Box
Omega Paw Roll 'n Clean Litter Box