Installation:Remove the secure tie that holds together the cover, AC adapter and warmer. Unzip cover and remove the warmer to inspect before using. Insert warmer back into the Heated Wellness Cushion with the side marked "This Side Up" facing upward and power cord safely exiting out of upper opening. Tuck white fabric product tag inside cover and close zipper snuggly around warmer's power cord. Plug the warmer's quick power connector into the AC adapter connection. Properly plug the AC adapter into a standard wall outet and position the cord out of the path of foot traffic.Operational Test:Plug in the Heated Wellness Cushion with the warmer properly installed using the Operating Guide.Wait 30 minutes.Place your hand inside the zipper opening of the Heated Wellness Cushion, and you should feel warmth generated by the warmer.Note: Do not expect the exterior surface of the cushion to feel hot to the touch. Temperatures that feel hot to you are too warm for extended use by your pet.Care Instructions:Unplug the Heated Wellness Cushion from the wall outlet and remove warmer from cover. Wipe the warmer clean with a damp cloth or sponge. Do not use chemicals or detergent to clean the warmer. Do not immerse the warmer, power cord or power adapter in water or other liquid. Before cleaning the cover the warmer must be removed. Use mild detergent and machine wash cover on gentle cycle. Place cover in a machine dryer on low heat or allow to air dry. After cleaning warmer and/or cover, ensure that both are completely dry and then replace warmer back into cover.
PetSafe Little Dog Heated Pet Cushion
Size: Small
Dimensions: 31.5" L X 25.6" W X 1.6" H
Pet Size:
Additional Product Information:
