DirectionsRemove dog crate and place on floor with the plastic pan on bottom. Locate latch on side and open.Using both hands, pull the top of the crate upwards until the crate becomes square.Holding the top with one hand, reach inside and pull the door panels towards you. Secure door in place by using the clips located on both side panels and top panel. Repeat this for back panel.Caution: Always remove collar and tags before placing your pet inside the Basic Training Crate.Instructions for Installing the Divider PanelAfter assembling your Basic Training Crate unfold the divider panel and place it inside the crate through one of the two doors.When you have decided on the position of the divider panel, attach the side panel with the two hooks on the vertical wire on the side of the crate that has the door.Find the appropriate vertical wire on the opposite side of the crate and attach the divider panel hooks. If side panel with multiple hooks is attached to the side with the door, the door will not operate.Remember to leave enough room for your pet to lie down.Made in Taiwan.
Petco Premium 2-Door Dog Crate
Dimensions: 24" L X 18" W X 19" H
Model: Model 400 Series
Pet Size: For Pets up to 25 lbs.
Petco Premium 2-Door Dog Crate
Dimensions: 30" L X 19" W X 21" H
Model: Model 600 Series
Pet Size: For Pets up to 40 lbs.
Petco Premium 2-Door Dog Crate
Dimensions: 36" L X 23" W X 25" H
Model: Model 700 Series
Pet Size: For Pets up to 70 lbs.
Petco Premium 2-Door Dog Crate
Dimensions: 42" L X 28" W X 30" H
Model: Model 800 Series
Pet Size: For Pets up to 90 lbs.
Petco Premium 2-Door Dog Crate
Dimensions: 48" L X 30" W X 32" H
Model: Model 900 Series
Pet Size: For Pets up to 110 lbs.