Assembly InstructionsWire kennel comes collapsed and in locked position with plastic catch pan include. Simply lay kennel flat on any surface and locate lock wire. Lock wire should be pointing up for proper assembly position.Unlock wire kennel by pulling lock wire down. Fold out kennel panels.Grab overhanging panel, lift up, and swing over to form main structure of kennel.Reach in and grab end panels, pull up, and lock into top panel hooks.Make sure end panels are secured to top panel using end panel hooks. End panel hooks should be hooked on the outside of top panel.Open door by raising latch mechanism all the way up and pushing over. Always make sure door is properly secured when animal is inside.To remove plastic catch pan, simply lift up catch pan access door and pull out pan from bottom of kennel without having to open animal access door. An access door hook is provided to hold door in open position.To collapse folding kennel, disengage top and side panel hooks and fold end panels in until flat. Swing main structure of kennel to the side opposite lock wire until structure is flat. Now swing panel back toward the lock wire; snap lock wire for transporting.
Petmate Deluxe Edition Wire Kennel
Size: Giant
Dimensions: 48" L X 30" W X 35" H
Pet Size: For Giant Dogs
Petmate Deluxe Edition Wire Kennel
Size: Large
Dimensions: 36" L X 24" W X 28.5" H
Pet Size: For Large Dogs
Petmate Deluxe Edition Wire Kennel
Size: Intermediate
Dimensions: 30.5" L X 21" W X 25.5" H
Pet Size: For Intermediate Dogs
Petmate Deluxe Edition Wire Kennel
Size: Medium
Dimensions: 25" L X 18" W X 22.5" H
Pet Size: For Medium Dogs
