Dogloo KD Pro Assembly Instructions: Step 1. Remove contents from box. Note the description and location of each component (section A, B, C, D, and 2 cap-nuts) Note: Vent cap already installed on Section D. Step 2. Place section A (bottom) on floor as shown in figure 1. Position, press and snap section b into place along outer wall making sure it is firmly locked in all seven snap locations. Step 3. Position, press and snap section C into place making sure it is firmly locked in all seven snap locations. Step 4. Position, press and snap top section D into place making sure it is firmly locked in all seven snap locations. Step 5. Install cap-nuts onto plastic posts located on the underside of section D shown in figure 2. Align cap-nuts over posts and press firmly until sections C & D are secured together. (see figure 1 example) Step 6. Install dish holder into holes located on side of doghouse. Note: there are four different dish holder locations. (see figure 1 for example). Made in USA.
Petmate Dogloo KD Pro
Size: Large
Dimensions: 40"L X 35"W X 27.5"H
