Installation Instructions: No Tools RequiredMeasure the width of the opening where your gate will be used. While holding the gate with the locking bar toward you (numbers will be upright), life the locking bar and slide the locking ping into the slot that matches the opening size.Push on the locking bar. This should put pressure on the 4 rubber bumpers holding the gate in place. If the gate is still loose in the opening, move the locking pin to the next slot until you get a good solid fit in the opening. Do not force the locking bar down. This could put too much pressure on the gate causing damage to your opening, the gate or both. (The locking bar will have a slight bow. However, if the bow is large, ease off the one slot, making sure it still has a good solid hold in the opening.)To open the gate, simply pull up on the locking bar.
North States Clear View Pet Gate XT
