Oster Kool Lube 3 Clipper Blade Coolant/Lubricant/Cleaner

Directions: Kool Lube 3 is nonflammable and nonconductive and therefore can be sprayed while equipment is running. Kool Lube 2 is a quick effective lubricant that provides instant cooling, lubrication and cleaning for your clipper blades. Simply spray Kool Lube 3 through the clipper blades occasionally, during the time you are clipping. The results are reduced friction, heat and less blade wear without a heavy residue of oil. For additional lubrication, apply a thin film of Oster Lubricating Oil to the blades before each use. Important: Always test on an inconspicuous area before using. May be harmful to certain plastics. Warning: Vapor Harmful. Contains trichloroethylene. Use with adequate ventilation to keep exposure levels below the 25 parts per million O.S.H.A. permissible exposure limit (PEL) during an eight hour period (time weighted average). Consult the product material safety data sheet for additional information regarding exposure concerns. Avoid inhalation of spray mist vapors. If overcome by fumes, remove victim to fresh air. Resuscitate if necessary. Get medical attention. Avoid contact with eyes and skin. In case of eye contact, flush immediately with water and continue for 15 minutes. If discomfort persists, see physician. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F. Warning: this product contains a chemical or chemicals known to the state of California to cause cancer. Keep Out of Reach of Children.