Easy to Install and UseFor Outdoor Spigot, Garden Hose, or Laundry Tub:Twist Rinse Ace Indoor/Outdoor Pet Sprayer hose end onto spigot or garden hose threads. Turn on water. Press grooming sprayer button to start water flow. Water will flow through only when the button is pushed. Please note: the extra parts enclosed are for use only on bathroom or kitchen faucets. You won't need them for spigot, hose, or laundry tub usage.For Bathroom and Kitchen Faucets:Locate the new aerator and the quick-connector provided in the package. Remove the two black rubber washers from inside the aerator.Remove the old aerator and washer from your faucet's spout. If you need to use an adjustable wrench or pliers, cover aerator with a cloth first to prevent scratching.If your spout is threaded on the outside, place only the thinner rubber washer inside the new aerator. If your spout is threaded on the inside, place only the thicker rubber washer inside the new aerator.Twist the new aerator back onto the spout. This aerator can remain permanently attached.Twist the threaded end of the quick-connect adapter into the hose base.Attach the quick-connect adapter to the aerator by holding down the white ring and sliding over the end of the aerator. The system is now connected.Turn on the water and press the grooming sprayer button to start water flow.To remove hose, slide down the white ring on the quick-connect adapter and pull down gently to detach.Helpful HintsAlways check the water temperature and adjust if needed before spraying your pet.Before storing, hold hose vertically and push down on grooming sprayer button to drain remaining water from hose. Coil for easy storage with your other pet supplies.Occasionally the aerator becomes separated during shipping. If this happens to you, please call the manufacturer at 1-800-867-4673 and we will help you reassemble the aerator. This won't affect the performance of the product.
Rinse Ace 3-Way Pet Faucet Sprayer
Dimensions: Hose: 8' Length
