Shake can before spraying.Concrete: 1. Remove excess urine, dog marking, feces or vomit. 2. Spray on affected area. Concrete may become slick, so wipe dry with a clean rag or allow to air dry. (be careful while walking on wet floors.) 3. Look and sniff to see if odor and stain are completely gone. If not, product did not come in direct contact with odor source. Repeat step 2 as needed.If odor and stain return: top layer of odor source has been eliminated, drawing up remaining odors that penetrated concrete. Repeat steps 2 and 3 until odor is completely gone, each application eliminates odor source from deep within concrete. No need to soak. Just make sure product comes in contact with odor source.Careful: Spraying the can at an angle greater than 60 degrees may release all of the propellant and cause can to stop spraying.Precautions: All ingredients are non-toxic and harmless to pets, people and the planet. While contact with this product is not harmful, we recommend you keep it out of the reach of children. In case of eye contact, rinse with water.Warning: Contents under pressure. Do not puncture, freeze or incinerate. Do not store where temperature exceeds 120 degrees in direct sunlight.
CLEAN + green Concrete and Grout Cleaner, Odor Eliminator & Stain Remover
Size: 16 fl. oz.
Scent:
Pack Size: