Clean Air Delivery Rate Certified RatingAHAM CertifiedFrom air cleaner to air cleaner, compare the CADR numbers. First, look at suggested room size. Then refer to the tobacco smoke, dust, and pollen Clean Air Delivery Rate (CADR) numbers. The higher the numbers, the faster the unit filters the air.This air cleaner is suggested for use in a single closed room up to 111 square feet.Room size ratings conform to the AHAM Certification Program criteria of 80% smoke reduction. Higher Clean Air Delivery Rates provide improved performance in all room sizes. Portable air cleaners will be much more effective in rooms where all doors and windows are closed.Tobacco smoke: 72Dust: 62Pollen: 65These values represent performance that can be expected within the first 72 hours of operation. Subsequent performance may vary with use.Important Safety InstructionsRead all instructions before using this Air Purifier and save these important instructions.Always place this Air Purifier on a firm, level surface. Always place the Air Purifier at least six inches away from walls and heat sources such as stoves, radiators, or heaters. This Air Purifier may not work properly on an uneven surface.Place the Air Purifier in an area that is out of the reach of children.Before using the Air Purifier, extend the cord and inspect for any signs of damage. Do not use the product if the cord has been damaged.This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat or override this safety feature.Always unplug the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned.Do not tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.Do not immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the Cleaning and Filter Replacement instructions.IntroductionThank you for purchasing the HEPAtech Air Purification System from Hunter Fan Company. You have purchased the latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe.Your HEPAtech Air Purification System outperforms other air purification systems by removing dust, smoke, and pollen particles as small as 0.1 microns in size. Room air is pulled in through the front grill and cleaned across the activated carbon pre-filter and the HEPAtech system filter. Clean air is then released out the top grill in order to avoid stirring up settled particles.Model 30027 includes an ionizer.Using the ionizer improves the quality of air in the room. Negative ions are released into the air, and positively charged particles cling to the negative ions. These particles settle out of the air an can be vacuumed up during normal cleaning. These particles are also more easily trapped in the HEPAtech system filter as they pass through the HEPAtech Air Purification System.Using Your Air PurifierPlace your HEPAtech Air Purification System on a hard, flat surface. Hunter Fan Company recommends placing it on a table top in order to achieve the best air circulation for the room.Before turning the Air Purifier on, you need to open the front cover and remove the protective plastic that is surrounding the HEPAtech system filter. Press the buttons that are on each side of the front grill. When they are pressed inward, you will be able to pull the front grill forward, opening the unit.The filter comes to you installed in the correct position. Grasp the filter, and pull it forward, up, and out of the unit. Remove the plastic wrapping and replace the filter in the unit. The white HEPAtech filter material should be facing outward (towards you).Before closing the front cover, check the placement of the pre-filter. It is installed under clips in the front cover. The pre-filter should be replaced every three months.Close the front cover by once again pressing the buttons and allowing the front cover to slip into place over the buttons. The unit is now ready for normal operation.Plug the unit into a 120V electrical outlet.Select a speed by sliding the speed selector to the appropriate location. The red power light will be illuminated when you have selected a speed.Turn the ionizer on by sliding the ionizer switch to the on position. The green light will be illuminated when the ionizer is on.Note: The ionizer can release negative ions when the fan is not blowing. If it is used consistently without the fan, the dust particles that are attracted to the negative ions may deposit on your walls and floors. To minimize these deposits, Hunter Fan recommends that you use the ionizer only when the fan is blowing (when the unit is on LO, MED, or HI speed).Read and follow all manufacturer instructions, warnings, directions, and precautions included with and on product.
Hunter HEPAtech Air Purifier
Size:
Scent:
Pack Size: