Simple Solution Carpet Shampoo

DirectionsTest for colorfastness in an inconspicuous area before using.Surface Preparation: First vacuum the carpet and fabric surface thoroughly removing loose soil and lint. Pre-spot as necessary using Simple Solution Fabric, Upholstery, and Surface Cleaner.Soil Extraction Machine Application: In a solution tank of a soil extraction machine pour two ounces of Simple Solution Carpet Shampoo per gallon of warm water. Lightly mist the carpet, then extract the solution and soil residue. Remove as much moisture as possible from the carpet fibers by repeating the extraction. To speed up drying and improve the general appearance of the carpet, brush the pile in one direction while the carpet is still damp.Hand Cleaning Application: Use two ounces Simple Solution Carpet Shampoo per gallon of water. Dip a scrub brush in the solution and shake off the excess. Thoroughly brush the solution into the carpet fibers, using a circular motion. Pick up the solution and soil residue with a clean, dry cloth. While the carpet is still damp, brush the pile in one direction to speed up drying and improve the general appearance.Upholstery and Drapes: Use the same method as for Soil Extraction Machine or Hand Cleaning Application.For Carpet Odors: Treat the problem area using Simple Solution Stain and Odor Remover in extraction machine or by hand.Caution: Contains ethylene glycol monobutyl ether. Avoid breathing vapors or spray mist. Use only in a well-ventilated area. If inhaled, move to fresh air. In case of eye contact, flush with water for 15 minutes and see a physician immediately. If swallowed, do not induce vomiting. Give several glasses of water and get medical attention immediately. For skin contact, wash thoroughly with soap and water. See a physician if irritation persists.Keep out of reach of children.