AssemblySlip the end of the hose over the cap on the cylinder. It may be necessary to heat the tip of the 72" vinyl hose (by holding it under a hot-water faucet for five seconds). The hose must fit tightly. Hot water will also eliminate any kinks.To Activate Self-Starting SiphonPlace an empty bucket near and below the aquarium.Grasp the hose four to six inches above the top of Gravel Vacuum Cleaner with hand on top. Place the other end of hose in bucket.Completely submerge the Gravel Vacuum Cleaner cylinder and cap in aquarium water. Keeping the loop of the hose as low as possible, move Gravel Vacuum Cleaner up and down rapidly five or six times or until siphoning begins.Some gravel will rise slightly in cylinder as debris is removed, but will fall down as cylinder is lifted. At least once a month, remove and replace about 25% of aquarium water.Made in USA.
Lee's Ultra Self-Starting Ultra Gravel Vac
Dimensions: Hose: 72"Length, Tube: 16"H X 2"Diameter
Style: Large
