For use only in fountains and ornamental ponds with synthetic liners. Do not use in ponds with invertebrates and crustaceans.Dislodge string algae off stones with high pressure hose nozzle and scoop out with a fine mesh net or pond vacuum. ENSURE the pond/fountain is well aerated.Dosage: 10 ml for every 120 gallons of pond water (use top of supplied screw cap). 1/4 cup (60 ml) for every 720 gallons of pond water. Dedicate use of the measuring cup to algaecide applications only.Dilute the proper dosage in a bucket of water. Pour diluted mixture into the pond or fountain evenly along the edges. DO NOT overdose. Treatment may be repeated, if needed, every three days up to three total doses. Remove dead algae from pond.Warm Weather Caution: Before adding TetraPond AlgaeControl, be sure to provide adequate aeration from a fountain, waterfall, or air pump. Keep pump(s) running 24 hours a day when using this product, especially during warmer months.Note: Do not use in ponds established for less than 3 months.Notice: This product contains chemicals known to the state of California to cause cancer.Precautionary Statements: Hazards to humans and domestic animals. Caution: Harmful if swallowed. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling.First Aid: If in eyes- hold eye open and rinse slowly and gently with water for 15-20 minutes. If on skin- take off contaminated clothing. Rinse skin immediately with plenty of soap and water for 15-20 minutes. If swallowed- call poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by the poison control center or doctor. Do not give anything by mouth to an unconscious person.
TetraPond AlgaeControl
Size: 16.9 fl. oz.
Gallons Treated: Treats 6,000 gallons
5.4% Poly [Oxyethylene, (Dimethyliminio) Ethylene (Dimethyliminio) Ethylene Dichloride]. Inert Ingredients: 94.6%.
