TetraPond Pond Water ClarifierWater Clarifier keeps pond water clear by safely clumping contaminants into easily removable masses. Clumps sink to the pond's bottom and can be removed by pond filter, wet vacuum or skimming net. Regular use prevents cloudy and discolored pond water. Will not harm pond life and plants when used properly.
Calculate pond gallons using the following formula: Length X Width X Average Depth = cubic feet. Cubic feet X 7.5 = pond gallons. Shake well. Use in morning for best results.Dosage: 10 ml for every 50 gallons of tap water (use top of cap). 1/4 cup for every 300 gallons of pond water. Dilute the proper dosage in a bucket of water. Pour diluted mixture into the pond evenly along the edges and in the middle. Stir the water with hose spray or stick to further distribute the solution throughout the pond. Provide aeration to the pond with fountain, waterfall or air pump when using this product. Keep pumps running 24 hours a day. Remove clumps of contaminants from pond bottom with a fine mesh net or pond vacuum. Pond filters will also remove some of the clumps. Re dose as required, allowing 3 days between treatments using 1/2 dosage. 10 ml for every 100 gallons of pond water (use top of supplied cap). When using this product, carbonate hardness should be maintained at a level greater than or equal to 1-2 DH. If in doubt about your water's hardness, replace 20% of your pond's volume with fresh water. Be sure to use water conditioner any time you add water to the pond. Do not use more frequently than every three days to avoid excessively stressing the fish. For outdoor ornamental ponds only. Keep out of reach of children.
TetraPond Pond Water Clarifier
Size: 16.9 fl. oz. Gallons Treated: Treats 2,500 gallons