Warning: Do not expose eyes and skin to the UV light. Rays may be harmful to unprotected skin. Always unplug sterilizer before accessing the bulb chamber.BioCube Setup Directions:Unplug the BioCube return pump. Remove the BioCube pump, tubing and filter wall connector from BioCube.Use indicated tubing to connect bottom of mini ultraviolet sterilizer to pump.Place pump and sterilizer back into the BioCube.Connect the top of the sterilizer to BioCube filter wall outlet using BioCube adaptor. BioCube adaptor takes the place of the filter wall connector.Plug in pump and sterilizer.Note date of installation. Bulb unit should be replaced every 6 months to maintain function.Nano Setup Directions:The sterilizer is designed for full or partially submerged internal aquarium use only. Do not use outside the aquarium.Connect pump to bottom of sterilizer with 1/2" or 12 mm I.D. tubing. Pump should not exceed 300 gph; ultraviolet works optimally at 100-200 gph.Replace BioCube adaptor with universal adaptor and flexible tubing if necessary.Connect flexible tubing to outlet and return back to the aquarium.
Oceanic BioCube Mini Ultraviolet Sterilizer
Watts: 5 Watts
