Assembly Instructions:Place the wire cage set on a flat surface and carefully unfold all panels.Connect the front cage panel to the left side panel. Attach the "J" shaped wire hook on the left panel to the fron panel and the "J" shaped wire hook on the front panel to the left panel. This creates an interweave connection. (hint: start by attaching bottom "J" hook and move up and attach top "J" hook last)Repeat this connection between the back panel and the left side panel using the alternating "J" shaped wire hooks.Repeat this connection between the back panel and the right side panel using the alternating "J" shaped wire hooks.Repeat this connection between the right side panel and the front panel using the alternating "J" shaped wire hooks.Turn the wire cage set upright and place it on top of the plastic base inside the grooves of the base. Lock the wire cage set to the plastic base by pressing down on the wire latches on both sides of the plastic base.Insert the exercise wheel through the top doorway and connect between the 4th and 5th wires of the back panel. Insert the shelves through the top doorway. The shelf with the shorter fun tube is connected to the 12th wire up from the bottom and the shelf with the longer fun tube is connected to the 20th wire up from the bottom.To ensure the safety of your pet be sure that the latches to the front and top doors are secure by firmly pressing down.
Petco Playhouse 3-Level Small Animal Habitat
Dimensions: 16" L X 12" W X 20" H, 3/8" Wire Spacing
