Step 1: Place the wire cage set on a flat surface with the door facing upStep 2: Connect the front cage panel (includes doorway) to the left side panel. Attach the J shaped wire hook on the front panel to the left of the panel. Repeat this process for the other sides until all panels of the wire cage set are connected with the J hooksStep 3: Turn the wire cage set upright and place it on top of the plastic base inside the grooves of the base. Lock the wire cage set to the plastic base by pressing down on the wire latches on all sides of the plastic baseStep 4: Attach the ramp to the shelf by aligning the slots of the ramp with the snap hooks of the shelf and pressing down. Fit the shelf with ramp attached through the front door and attach to the 3rd wire up from the bottomStep 5: Position the water bottle on the outside of cage and attach the bendable wire that is inside the water bottle to the 10th wireStep 6: Position the food dish in a corner away from the water bottleAssembly Complete: To ensure the safety of your pet be sure that the latch to the front door is secure by firmly pressing down
PETCO Guinea Pig Starter Kit
