Installation Instructions for Petco Small Animal Mesh Exercise Wheels:Option 1 - Standing Mesh Wheel:Remove all packaging before installation.Make sure that you mount the wheel where your pet has easy access to it and enough room for the wheel to spin without interference.Supervise your pet when using this product to ensure your pet's weight is supported.Option 2 - Attaching Mesh Wheel to a Habitat:Remove all packaging before installation.Unscrew the wing-nut on the stability bar from the back of the wheel.Remove the base unit.Keeping one of the stability bars against wheel, place the screw through the habitat wiring where you would like to mount it. Make sure that you mount the wheel where your pet has easy access to it and enough room for the wheel to spin without interference.Slide the outer stability bar over the screw and tighten the wing-nut on the outside of the habitat wiring to secure the wheel on the cage.Supervise your pet when using this product to ensure your pet's weight is supported.Cleaning Instructions: Clean wheel once a week thoroughly with warm water and dry. Do not use abrasive cleaners or detergents on any part of the wheel as these will damage the finish or harm the animal.Caution: THIS ITTEM IS NOT SUITABLE FOR CHILDREN. Always supervise your pet when using this item. Inspect and clean product on a regular basis and replace if any part becomes worn, loose or detached. Please do not place in direct sunlight and/or damp area - may cause discoloration and potential rust on metal surfaces. Not recommended for outdoor use. Provide fresh food and water for your pet at all times. NOTE: it is important to choose the correct size wheel for your pet to avoid injury.
Petco 5" Mesh Wheel
Dimensions: 5" Diameter X 2" W
Petco 9" Mesh Wheel
Dimensions: 9" Diameter X 3.5" W
Petco 7" Mesh Wheel
Dimensions: 7" Diameter X 2.5" W
Petco 11" Mesh Wheel
Dimensions: 11" Diameter X 4.5" W
