Blade Ice is a quick and effective lubricant that provides instant cooling, lubrication, and cleaning for your clipper blades.Simply spray Blade Ice through the clipper blades occasionally, during the time you are clipping. The results are reduced friction, heat, and less blade wear without a heavy residue of oil. For additional lubrication, apply a thin film of Lubricating Oil to the blades before each use.Dries fast.Will not harm most plastics.
Warning: Contents are flammable. Spray sparingly and directly on blades. Do not spray in, on, or around the electric switch areas. Use in well ventilated area.Caution: Contents under pressure.Important: Always test on an inconspicuous area before using.Caution: May cause mild eye and skin irritation. Irritating to eyes, nose, and respiratory tract. Can be fatal if swallowed.First AidEyes: Immediately flush with plenty of water for at least 15 minutes. Get immediate medical attention.Skin: Immediately flush with plenty of water for at least 15 minutes. Get prompt medical attention.Inhalation: Remove to fresh air. If symptoms develop, seek medical attention.Ingestion: Obtain immediate medical attention.Use with adequate ventilation. Avoid breathing vapors. Avoid skin and eye contact. Wash thoroughly after handling.Warning: Product is not required to be labeled as flammable as described in 16 CFR 1500.3 and 1500.45. Product can be ignited. Keep away from heat, sparks, and flame. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120øF as container may burst. Avoid prolonged exposure to sunlight.Keep out of reach of children.See Material Safety Data Sheet before use.24-Hour Medical Emergency: 1-800-228-5635.Contains no ozone depleting chemicals.Made in USA.